/api/devices CRUD (MAC in any format → 12 lowercase hex; a 20-char
provisioning password, stored encrypted and shown to admins, who type
it into the phone) and GET /:id/config-preview with passwords masked.
GET /prov/... per 07 §2: <mac>.cfg (Yealink), cfg<mac>.xml
(Grandstream), the empty Yealink common file. Basic auth with the MAC
and the device's password (timing-safe), 404 for unknown MACs or the
other vendor's file, 403 outside the local nets when LAN-only, 404 when
provisioning is off, Cache-Control no-store, last provisioned time and
IP recorded. Limits: 20 requests / 10 min per IP outside the local nets
(an office's phones rebooting together would pass it), and 10 failures
block the IP for an hour. A first request without credentials isn't a
failure: phones ask that way and retry after the 401.
Templates (pure functions of a ProvisionContext) hold the account,
voicemail, pickup codes and the provisioning settings; BLF, time zone
and phonebook come with M10-T2.
Web: Phones page (table, drawer with what to type into the phone,
config preview; manual settings for generic phones). e2e m10-t1: phone
added in the UI, 401 then the file, and a baresip phone registers with
only the account from it.
Also: the loadSnapshot test made its database inside the test (20 s);
under a full parallel run that timed out now and then. It now does it
in a hook like the others.
Task: M10-T1
Queues per 03 §6.8: queues_selfphoneng.conf (members as Local agents
following their hint), sp-queue-{id} (answer, prefix, record, Queue with
max wait, timeout destination), the number in sp-local-numbers and
destApp queue. Golden case queue; the Asterisk load test now checks
`queue show` lists each queue's members.
*45<queue> toggles login and checks PQMSTATUS/UPQMSTATUS, so a code for
a queue the caller isn't an agent of plays ss-noservice and stores
nothing (spec snippet fixed). Pauses live in queue_member_state, AstDB
SP/QPAUSE (resynced on connect) and app_queue; QueuePause is re-sent
after every `queue reload all` and rollback, which unpause everyone.
/api/queues CRUD with members [{extensionId, penalty}], admin
pause/unpause, GET /:id/stats; /api/me/queues/:id/pause|unpause for
Home. Stats come from queue_calls (new table), filled from app_queue's
AMI events plus UserEvent SpQueueExit in the fail branch: a real call
showed that when no agent rings, the Queue part of a call vanishes into
the next leg's CDR, and Asterisk 24 sends QueueCallerAbandon on
timeouts too.
Live: QueueTracker (QueueStatus on connect and after applies, queue
events); admins see every queue, users the queues they're agents of.
Web: Queues page (list, form with every column, detail page with
waiting callers, agents and pause buttons, today's stats), queue tiles
on the dashboard, queue login switches on Home, Queue in the
DestinationPicker.
CDR fixtures for queue answered/abandoned/timeout calls. e2e m8-t1 with
real phones: 3 callers wait with 2 agents, one paused by *45550 and one
in the UI, unpause connects the longest waiting caller, one times out
to the overflow phone, stats count it all. The whole e2e chain passes.
Task: M8-T1
/api/ring-groups CRUD with members as ordered memberIds (unique, must
exist), number from the ring-group range, a no-answer destination
(never itself), and delete refused while something points at it. The
generator renders sp-rg-{id} (Dial through sp-rg-member: all at once with
the total ring time, or one at a time with the per-member time, music
instead of ringing on request), adds the number to sp-local-numbers, and
destApp sends ring_group destinations there. Golden case ringgroups.
The DestinationPicker is now generic over targets picked by id and gains
"Voicemail of a user" and "Ring group" (M6-T6 completes it). Caller-name
prefixes (DIDs and ring groups) get a space before the caller's name.
Ring groups page with an ordered member list.
e2e m6-t2 found the new-group form failing on an unset no-answer
destination (fixed: defaults to hang up). It checks ring-all (both ring,
191 answers) and hunt (190 alone for 5 s, then 191) with real calls. The
generator debounce test now waits for the apply instead of a fixed 150 ms.
Task: M6-T2
LiveState loads extension states and registered devices from Asterisk on
every AMI connect and follows ExtensionStatus/ContactStatus; the hub sends
a snapshot then deltas batched every 250 ms (devices for admins only),
pings every 30 s and closes unauthenticated sockets with 4401. The web UI
keeps one reconnecting socket in a zustand store, shows a Reconnecting
banner, a Dashboard (online, on a call, telephony engine) and status dots.
Fix: Asterisk 24 has no 'pjsip reload'; reload with
'module reload res_pjsip.so'. AMI errors now carry the CLI output.
Milestone check, automated: call-test.ts registers two baresip phones and
holds a 30 s call with RTP both ways (pnpm test:asterisk); the recorded
session drives the live-state tests. scripts/e2e/m2-live.mjs runs api +
Asterisk + phones + browser on a private Docker network: a new extension
is live in Asterisk in ~1.3 s, the dashboard shows 2/2 online and red dots
during the call.
Task: M2-T6
Golden cases empty, one-user, webrtc-disabled and hostile-names; each also
renders identically from shuffled input. pnpm test:asterisk boots the
asterisk image with every golden case and fails on a missing endpoint or
context or any ERROR log line (checked against a deliberately broken case).
On 24.0.0-rc2: 101 and 101-web load with every set_var.
Task: M2-T3
render() is pure and gives every file the header (bodies arrive per task).
apply() runs one at a time, debounces requestApply, writes changed files
atomically (mode 0640), keeps .prev, sends each needed reload once, skips
pjsip reload and sets restartRequired when transports change, and records
generator_runs. AMI connects on startup and every reconnect forces a full
apply. Admin routes: config apply/rollback and a masked generated-files view.
Task: M2-T2
iamdoubz