iamdoubz
609965bba5
People lists every extension with its status dot and a search box: a right-hand column on wide screens, /me/people on small ones. Call uses the browser softphone when it's on, else POST /api/me/click-to-call, which originates to the user's desk phone first (409 if none is registered). During a call: Transfer (blind), Talk first (consult), or drag the call card onto a person; a held call card offers Complete transfer whenever another call is active. useSoftphone moved to its own module. e2e m5-t3: the dot changes ~30 ms after Asterisk's hint; click-to-call rings 174 before 172. cdp click() takes a scope (People also has Call/Transfer buttons). trunk-test ignores the RTCP-at-teardown EPERM error seen once. Task: M5-T3
77 lines
5.1 KiB
Markdown
77 lines
5.1 KiB
Markdown
# Browser checks
|
||
|
||
Dependency-free scripts that drive a headless Chromium (Edge/Chrome) over the DevTools
|
||
protocol. They need an api serving the built web UI and a fresh database.
|
||
|
||
```sh
|
||
pnpm --filter @selfphoneng/web build && mkdir -p /tmp/sp && cp -r apps/web/dist /tmp/sp/public
|
||
# fresh DB, then from /tmp/sp:
|
||
DATABASE_URL=postgres://… INITIAL_ADMIN_EMAIL=admin@example.com INITIAL_ADMIN_PASSWORD=initial-admin-pw \
|
||
node --env-file=<repo>/.env --conditions=source <repo>/apps/api/src/index.ts
|
||
BROWSER=/usr/bin/chromium node scripts/e2e/m1-t4.mjs http://127.0.0.1:8080 admin@example.com initial-admin-pw /tmp/shots
|
||
node scripts/e2e/mobile.mjs http://127.0.0.1:8080 admin@example.com correct-horse-battery-staple /tmp/shots
|
||
```
|
||
|
||
`m1-t4.mjs` is the M1-T4 acceptance flow: forced password change, then create/edit/delete a user.
|
||
|
||
## M2 live loop (any Docker host, no host networking)
|
||
|
||
`m2-live.mjs` runs the whole chain on a private Docker network: a test Asterisk with AMI published
|
||
on `127.0.0.1:15038`, the api writing config into it, two baresip phones, and the dashboard in a
|
||
browser. It checks that a new extension is live in Asterisk within 2 s, both phones show online,
|
||
and the dots turn red during a call.
|
||
|
||
```sh
|
||
node scripts/e2e/m2-live.mjs up /tmp/sp-live-conf
|
||
# start the api with AMI_PORT=15038 AMI_SECRET=m2-live-secret ASTERISK_CONFIG_DIR=/tmp/sp-live-conf
|
||
node scripts/e2e/m1-t4.mjs http://127.0.0.1:8080 admin@example.com initial-admin-pw /tmp/shots
|
||
node scripts/e2e/m2-live.mjs check http://127.0.0.1:8080 admin@example.com correct-horse-battery-staple /tmp/shots
|
||
node scripts/e2e/m2-live.mjs down
|
||
```
|
||
|
||
`m3-t1.mjs` runs on the same setup (after `m1-t4.mjs`): it starts a fake voip.ms (a second Asterisk
|
||
that accepts one sub-account) on the m2-live network, creates the trunk in the UI and waits for
|
||
**Registered**, then presses Test. `m3-t2.mjs` (after `m3-t1.mjs`) adds a phone number routed to a user in the UI and
|
||
checks `sp-inbound` in Asterisk, and that the extension can no longer be deleted. `m3-t3.mjs` (after
|
||
both) checks the default outbound rules, the test box, a user's calling permission, and that
|
||
reordering changes the include order in Asterisk. `m3-t4.mjs` (after all three) runs a tiny SMTP sink on
|
||
127.0.0.1:2525 and a baresip phone as 101, then checks the dashboard warnings, Settings → Email and
|
||
Emergency, and the Test notifications button (email arrives, 101 rings, red banner). Nothing dials 911. The fake provider from `m3-t1.mjs` stays up until `m2-live.mjs down`: a container that took
|
||
over its IP would be identified as the trunk.
|
||
|
||
`pnpm test:asterisk` (golden-file load test, `call-test.ts` with 30 s two-way audio between two
|
||
baresip phones, and `trunk-test.ts` with registration against a fake provider) needs no api at all.
|
||
|
||
`m3-t5.mjs` is the M3-T5 acceptance and needs its own fresh database: it signs in with the
|
||
initial password, walks all ten wizard steps against a fake voip.ms, then proves an inbound call
|
||
to the DID rings the new user's softphone and an outbound call leaves with the DID as caller ID.
|
||
|
||
`m4-t2.mjs` is the M4-T2 acceptance (no browser): start m2-live with a voicemail dir
|
||
(`m2-live.mjs up <confDir> <vmDir>`) and the api with `VOICEMAIL_DIR=<vmDir>`. It runs the SMTP
|
||
sink (`smtp-sink.mjs`, shared with `m3-t4.mjs`), adds a user and extension 150 with voicemail,
|
||
leaves a message from a Local channel, and checks the email arrives within 10 s with a PCM 8 kHz
|
||
wav attached. The voicemail itself (MWI on a phone, `*97`) is covered by `pnpm test:asterisk`.
|
||
|
||
`m4-t3.mjs <baseUrl> <adminEmail> <adminPassword> <vmDir> <shotsDir>` is the M4-T3 acceptance on the
|
||
same setup: it adds a user with extension 160 and a baresip phone with the mwi module, leaves
|
||
messages, then as that user in the browser plays one (marks it read) and deletes another, each
|
||
time checking the phone's MWI goes off within 5 s. It records the "no answer" greeting with a
|
||
fake microphone and checks a caller hears it.
|
||
|
||
`m5-t1.mjs <baseUrl> <adminEmail> <adminPassword> <shotsDir>` is the M5-T1 check in Docker: start
|
||
the api with `WEBRTC_WS_URL=ws://127.0.0.1:18088/ws`. `m2-live.mjs up` publishes Asterisk's HTTP
|
||
server on 127.0.0.1:18088 and RTP 10000–10019/udp. The script sets LAN IP = the container and public
|
||
IP = 127.0.0.1 (so ICE offers 127.0.0.1), restarts telephony, then signs in as a new user, enables
|
||
the softphone with a fake microphone, and checks two-way audio to a baresip phone (171) in both
|
||
directions.
|
||
|
||
`m5-t2.mjs` (after `m5-t1.mjs`, same user) starts two baresip phones (172, 173) through
|
||
`phones.mjs` and checks the softphone features: the incoming call dialog, DTMF, hold (music on hold
|
||
at the other end), call waiting, blind and attended transfer, and "Use here" moving the softphone to
|
||
a second tab (`cdp.mjs` `newTab()`).
|
||
|
||
`m5-t3.mjs` (after `m5-t2.mjs`) is the M5-T3 acceptance. It watches People in one browser while 173
|
||
calls 172 and measures the time from Asterisk's hint changing to the dot changing (must be < 1 s).
|
||
Then a second browser, as a new user with desk phone 174 and the softphone off, clicks **Call** on
|
||
172: 174 must ring first (Asterisk channel order), then the two are connected.
|