iamdoubz
c2b9fff126
/setup walks a fresh install to working calls: password (done by the forced change), company, network (detect public IP, LAN IP from /api/system/status, router checklist; restarts telephony because the transports changed), email (skippable), voip.ms trunk (Next unlocks on Registered), phone numbers, users (extension auto-numbered, temporary passwords shown once), main number routing, emergency (default E911 caller ID required once a trunk exists), done. Steps 7-8 ship now because the acceptance needs a user and a routed number; their M6 choices (everyone, IVR) come later. Admins land on /setup until it is finished or skipped. api: /api/setup/status and /complete, POST /api/settings/network/detect-public-ip (ipify, then ifconfig.me), GET /api/system/status (M3 subset), POST /api/system/asterisk/restart (an AMI disconnect during a restart counts as success). restartRequired clears on AMI connect once Asterisk's uptime shows it started after the change. The first phone number becomes the default outbound caller ID when none is set (found by the acceptance run: calls otherwise left with the provider's caller ID). Verified: scripts/e2e/m3-t5.mjs on a fresh database against the fake voip.ms: wizard end to end, then an inbound call to the DID rings the new user's softphone and an outbound call leaves as 13125550000 with the DID in Remote-Party-ID. m1-t4 now passes through "Skip setup". Task: M3-T5
48 lines
3.0 KiB
Markdown
48 lines
3.0 KiB
Markdown
# Browser checks
|
|
|
|
Dependency-free scripts that drive a headless Chromium (Edge/Chrome) over the DevTools
|
|
protocol. They need an api serving the built web UI and a fresh database.
|
|
|
|
```sh
|
|
pnpm --filter @selfphoneng/web build && mkdir -p /tmp/sp && cp -r apps/web/dist /tmp/sp/public
|
|
# fresh DB, then from /tmp/sp:
|
|
DATABASE_URL=postgres://… INITIAL_ADMIN_EMAIL=admin@example.com INITIAL_ADMIN_PASSWORD=initial-admin-pw \
|
|
node --env-file=<repo>/.env --conditions=source <repo>/apps/api/src/index.ts
|
|
BROWSER=/usr/bin/chromium node scripts/e2e/m1-t4.mjs http://127.0.0.1:8080 admin@example.com initial-admin-pw /tmp/shots
|
|
node scripts/e2e/mobile.mjs http://127.0.0.1:8080 admin@example.com correct-horse-battery-staple /tmp/shots
|
|
```
|
|
|
|
`m1-t4.mjs` is the M1-T4 acceptance flow: forced password change, then create/edit/delete a user.
|
|
|
|
## M2 live loop (any Docker host, no host networking)
|
|
|
|
`m2-live.mjs` runs the whole chain on a private Docker network: a test Asterisk with AMI published
|
|
on `127.0.0.1:15038`, the api writing config into it, two baresip phones, and the dashboard in a
|
|
browser. It checks that a new extension is live in Asterisk within 2 s, both phones show online,
|
|
and the dots turn red during a call.
|
|
|
|
```sh
|
|
node scripts/e2e/m2-live.mjs up /tmp/sp-live-conf
|
|
# start the api with AMI_PORT=15038 AMI_SECRET=m2-live-secret ASTERISK_CONFIG_DIR=/tmp/sp-live-conf
|
|
node scripts/e2e/m1-t4.mjs http://127.0.0.1:8080 admin@example.com initial-admin-pw /tmp/shots
|
|
node scripts/e2e/m2-live.mjs check http://127.0.0.1:8080 admin@example.com correct-horse-battery-staple /tmp/shots
|
|
node scripts/e2e/m2-live.mjs down
|
|
```
|
|
|
|
`m3-t1.mjs` runs on the same setup (after `m1-t4.mjs`): it starts a fake voip.ms (a second Asterisk
|
|
that accepts one sub-account) on the m2-live network, creates the trunk in the UI and waits for
|
|
**Registered**, then presses Test. `m3-t2.mjs` (after `m3-t1.mjs`) adds a phone number routed to a user in the UI and
|
|
checks `sp-inbound` in Asterisk, and that the extension can no longer be deleted. `m3-t3.mjs` (after
|
|
both) checks the default outbound rules, the test box, a user's calling permission, and that
|
|
reordering changes the include order in Asterisk. `m3-t4.mjs` (after all three) runs a tiny SMTP sink on
|
|
127.0.0.1:2525 and a baresip phone as 101, then checks the dashboard warnings, Settings → Email and
|
|
Emergency, and the Test notifications button (email arrives, 101 rings, red banner). Nothing dials 911. The fake provider from `m3-t1.mjs` stays up until `m2-live.mjs down`: a container that took
|
|
over its IP would be identified as the trunk.
|
|
|
|
`pnpm test:asterisk` (golden-file load test, `call-test.ts` with 30 s two-way audio between two
|
|
baresip phones, and `trunk-test.ts` with registration against a fake provider) needs no api at all.
|
|
|
|
`m3-t5.mjs` is the M3-T5 acceptance and needs its own fresh database: it signs in with the
|
|
initial password, walks all ten wizard steps against a fake voip.ms, then proves an inbound call
|
|
to the DID rings the new user's softphone and an outbound call leaves with the DID as caller ID.
|